MAINTENANCE WORK ON CHASSIS AND ENGINE 52
Removing a fuse
ಥ Switch off all power-consuming components and switch off the engine.
ಥ Dismount the air filter box lid. ( P. 58)
400270-10
ಥ Remove the protection cover.
Info
The fuse is located in the starter relay under the filter box cover.
ಥ Remove the fuse
.
Replacing the fuse
Warning
Fire hazardಗThe electrical system can be overloaded by the use of incorrect fuses.
ಥ Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
400273-10
ಥ Check parts for damage and wear. Replace damaged or worn parts.
Info
A reserve fuse is located in the starter relay.
Replace a burned-out fuse
only by an equivalent fuse.
ಥ Refit the fuse.
Fuse(58011109110)
Info
If the new fuse burns out, contact an authorized KTM workshop.
ಥ Replace the protection cover.
ಥ Install the air filter box lid. ( P. 58)
Ignition curve plug connection
500218-10
The plug connection is located in front of the fuel tank on the left of the frame.
Possible states
• Soft ಥIf the plug connection is separated, riding is more flexible.
• Performance ಥIf the plug connection is connected, higher performance is
achieved.
Changing the ignition curve
Changing the ignition curve from Performance to Soft.
ಥ Separate plug connection
. (Figure500218-10 P. 52)
Soft ಥGreater flexibility
Changing the ignition curve from Soft to Performance.
ಥ Connect plug connection
. (Figure500218-10 P. 52)
Performance ಥHigher performance
