HULL/ENGINE HOOD 13-9
Fittings
Mirror Removal
•
Open the front storage compartment cover.
•
Unscrew the nuts [A] and washers [B] and remove the
mirrors [C] (both s ides).
Mirror Installation
•
Be sure that the washer [A] are in position.
Mirror Stay Removal
•
To remove the right mirror stay [A], remove the bolts [B].
NOTE
○
The plate [C] on the inside of the hull will drop down
when the last bolt is removed.
•
Remove the right mirror (see Mirror Removal).
•
To remove the left mirror stay, perform the next proce-
dures.
○
Loosen the c lamp [A] and disconnect the flushing hose
[B].
•
Remove the flushing cap.
•
Pull up the flushing fitting [A] with the damper [B] from the
hull.
•
Unscrew the bolt [C] and remove the left mirror stay [D].
NOTE
○
The plate [E] on the inside of the hull will drop down
when the last bolt is removed.
•
Remove the left mirror (see Mirror Removal).
