A SERVICE OF

logo

58
error messages appear when using a USB connection
the error message “there was an error writing to <name of usb port>”
appears
The printer may not be receiving correct data from the other USB device or
hub. Connect the printer directly to the USB port on the computer.
printer does not turn on
The printer may have drawn too much power.
1.
Disconnect the power cord from the printer.
2.
Wait approximately 10 seconds.
3.
Reconnect the power cord to the printer.
4.
Press the Power button to turn on the printer.
See also:
printing
If you continue to have problems, contact
HP Customer Care
.
%ROWBZLQGRZVERRN3DJH7XHVGD\$SULO30