A SERVICE OF

logo

Open as PDF
next previous
49
cleaning the service station
1.
Dip the end of a clean cotton swab into the distilled water and remove
any excess water.
2.
Clean the rim of the sponge holder.
3.
Remove any ink and fibers from the top of the sponge. If the sponge is
higher than the rim, use the cotton swab to push it below the rim.
4.
Gently wipe the wipers and top surface of the caps.
after cleaning
1.
Reinsert the print cartridges and close the printer’s top cover.
2.
Reconnect the power cord to the back of the printer, then press the Power
button to turn on the printer.
3.
Print a test page from the HP Deskjet Toolbox by selecting Print a Test
Page.
4.
Repeat the cleaning procedure if smeared ink still appears on the
printouts.
See also:
aligning print cartridges
the hp deskjet toolbox
%ROWBZLQGRZVERRN3DJH7XHVGD\$SULO30