32
iron-on transfers
preparing to print
1.
With the printer turned on, open the top cover.
The print cradle moves to the center of the printer.
2.
Pull the top of the black print cartridge towards you until it is released,
then lift the cartridge from the cradle and place it in the print cartridge
container.
3.
Place the photo cartridge in the print cradle, then secure it into position.
If you are using a new photo cartridge, carefully remove the plastic tape
from the copper contacts.
4.
Close the top cover.
The print cradle returns to the home position in the side of the printer.
5.
Slide out both paper guides and remove all paper from the tray.
6.
Fan the edges of the iron-on transfer paper to separate them, then align
the edges.
7.
Place the iron-on transfer paper in the tray with the printable side down.
8.
Slide the paper guides snugly against the transfer paper.
9.
Align the print cartridges (see aligning print cartridges).
%ROWBZLQGRZVERRN3DJH7XHVGD\$SULO30
