A SERVICE OF

logo

Open as PDF
next previous
Switch Meshing
Configuring Switch Meshing
Figure 14-7. Example of the Screen for Configuring Ports for Meshing
3. In the Group column, move the cursor to the port you want to assign to
the switch mesh.
4. Press
to choose Mesh for the selected port.
5. Use the
^ or the v key to select the next port you want to include in
your mesh domain, then press [M] again. For example, if you were adding
ports A1 and A2 to your mesh domain, the screen would appear similar to
figure
14-8:
14-11