A SERVICE OF

logo

Port-Based Virtual LANs (VLANs) and GVRP
Port-Based Virtual LANs (Static VLANs)
VLAN Commands
Page
show vlans
show vlan <vlan-id>
max-vlans <1..256>
primary-vlan <vlan-id>
[no] vlan <vlan-id>
name <vlan-name>
[no] tagged <port-list>
[no] untagged <port-list>
[no] forbid
auto <port-list>
static-vlan <vlan-id>
below
11-17
11-18
11-18
11-19
11-20
11-20
11-20
11-20
11-20 (Available if GVRP enabled.)
11-20 (Available if GVRP enabled.)
Displaying the Switchs VLAN Configuration. The next command lists
the VLANs currently running in the switch, with VID, VLAN name, and VLAN
status. Dynamic VLANs appear only if the switch is running with GVRP
enabled and one or more ports has dynamically joined an advertised VLAN.
(In the default configuration, GVRP is disabled. (See
GVRP on page 11-34.)
Syntax: show vlan
When GVRP is disabled
(the default), Dynamic
VLANs do not exist on
the switch and do not
appear in this listing.
(See GVRP on page
11-34.)
Figure 11-12. Example of Show VLAN Listing (GVRP Enabled)
11-16