5
USING YOUR MINI CHOPPERPARTS & CONTROLS
GETTING STARTED
The following section will explain
how to get the most out of your mini
chopper. Please follow the
instructions carefully.
• Wash chopper bowl, chopper lid
and chopper blades with warm,
soapy water. Rinse and dry
thoroughly
• Put the blade attachment in first.
It sits at the bottom of the bowl.
Treat the blades with respect -
they are sharp!
• Seal the chopper bowl by putting
on the lid - from left to right.
Engage the locking position first,
on the left, with its three little
plastic uprights, then push down
on the right which has a small
protruding ledge
• Once the lid is on, and only then,
gently slide the bowl into position
on the base, engaging it securely
before switching on. Do not force
NNoottee::
Your mini chopper is equipped
with a safety feature, where the
blades will not operate unless the
chopper lid and chopper bowl are
correctly engaged.
• To release the bowl from the
base, press the button on the side
with the cable and pull the bowl
away from the left
•
NNeevveerr ttoouucchh tthhee ccuuttttiinngg eeddggeess ooff
tthhee bbllaaddee aass tthheeyy aarree vveerryy sshhaarrpp!!
• Add food ingredients to the
chopper bowl, distributing them
evenly with a spatula
When chopping, pre-cut the
larger parts of food into pieces of
even size, approximately 1.0 to
1.5cm (half inch to ¾ inch)
• If working with hot ingredients,
take care not to put your hands
over the little holes in the lid.
The steam needs to escape and
can be hot
1
3
4
5
2
6
