Filter
Top Products
4 - 30
ENG
CLUTCH
REMOVAL POINTS
Clutch boss
1. Remove:
● Clutch boss nut 1
● Lock washer 2
● Clutch boss
NOTE:
Straighten the lock washer tab and use the
clutch holding tool 3 to hold the clutch boss.
Å For USA and CDN
ı Except for USA and CDN
Clutch holding tool:
YM-91042/90890-04086
Å
ı
Primary clutch
1. Remove:
● Primary clutch nut 1
NOTE:
Loosen the nut while holding the magnet rotor
with the sheave holder 2.
INSPECTION
EC484500
Friction plate
1. Measure:
● Friction plate thickness
Out of specification → Replace friction
plate as a set.
Measure at all four points.
Sheave holder:
YS-1880-A/90890-01701
Friction plate thickness
Standard Limit
2.7 ~ 2.9 mm
(0.106 ~ 0.114 in)
2.6 mm
(0.102 in)