Filter
Top Products
3 - 15
INSP
ADJ
SPOKES INSPECTION AND TIGHTENING/WHEEL INSPECTION/
STEERING HEAD INSPECTION AND ADJUSTMENT
SPOKES INSPECTION AND TIGHTENING
1. Inspect:
● Spokes 1
Bend/damage → Replace.
Loose spoke → Retighten.
2. Tighten:
● Spokes
N
OTE:
Be sure to retighten these spokes before and
after break-in. After a practice or a race check
spokes for looseness.
T
R
.
.
2 Nm (0.2 m · kg, 1.4 ft · lb)
EC36T000
WHEEL INSPECTION
1. Inspect:
● Wheel runout
Elevate the wheel and turn it.
Abnormal runout → Replace.
2. Inspect:
● Bearing free play
Exist play → Replace.
STEERING HEAD INSPECTION AND
ADJUSTMENT
1. Elevate the front wheel by placing a suit-
able stand under the engine.
2. Check:
● Steering shaft
Grasp the bottom of the forks and gen-
tly rock the fork assembly back and
forth.
Free play → Adjust steering head.