Filter
Top Products
4 - 12
ENG
CYLINDER HEAD
CAUTION:
.Do not turn the crankshaft during instal-
lation of the camshaft. Damage or
improper valve timing will result.
● Remove the safety wire from the timing
chain.
4. Install:
● Washer
● Bolt 1
NOTE:
Install the bolt 1 while holding the rotor nut
with a wrench.
T
R
.
.
20 Nm (2.0 m · kg, 14 ft · lb)
5. Install:
● Timing chain tensioner
6. Check:
● Rotor “I” mark
Align with the crankcase stationary
pointer.
● Valve clearance
Out of specification → Adjust.
Refer to the “VALVE CLEARANCE
ADJUSTMENT” section in CHAPTER
3.
Installation steps:
● Remove the tensioner cap bolt 1 and
spring 2.
● Release the timing chain tensioner one-
way cam 3 and push the tensioner rod 4
all the way in.
● Install the tensioner with a new gasket 5
onto the cylinder.
T
R
.
.
Timing chain tensioner bolt:
10 Nm (1.0 m • kg, 7.2 ft • lb)
● Install the spring 2 and cap bolt 1.
● Tighten the bolt (with gasket) to the speci-
fied torque.
T
R
.
.
Cap bolt:
8 Nm (0.8 m • kg, 5.8 ft • lb)