Filter
Top Products
- 5 -
CONFIGURING THE MRC88m KEYPAD TO CONTROL THE XMUSIC
The XMUSIC is controlled by using the new “Metadata” Internal Commands. These new commands
can be used to control the XIS100, the XMUSIC, and the iPort. Figure 1 at the end of this shows
how each Metadata internal command functions.
1) Just above the Virtual Keypad (under the “Keypad” tab), select “Zone 1” from the drop-down box.
2) On the Virtual keypad, select SRC1.
3) On the right-hand portion of the Dragon window, make sure that the “Internal Commands” tab near
the bottom of the window is selected.
4) On the Virtual Keypad, select the “Ç PAUSE” button.
5) In the “Internal Commands” window, select the “Metadata Up” command.
6) In the “Zone” area, select the current zone, Zone 1.