Filter
Top Products
- 2 -
ENABLING THE XMUSIC DRIVER
1) Open the Project Options dialog box (“File->Project Options”).
2) Select the “Source Components” tab.
3) Select the “XMusic” tab.
4) Click the “Enable Xantech Music Server” check box. This enables the XMUSIC driver.
5) In the “Port:” field, make sure that “Com Port” is selected. This lets the driver know how the
XMUSIC is connected to the MRC88m.
Note: If you are using an Imerge S3000 instead of the Xantech XMUSIC, you must also manually
configure the RS232 settings of the COM port to match the Imerge S3000 (Dragon automatically puts
in the proper settings for the XMUSIC). Please see Appendix A near the end of this document for
more information.