Filter
Top Products
5
Setting Up the Game Power Mobile Gaming System
1. Follow the instructions for powering up the Mobile Gaming System on the
previous page.
2. Open up the Mobile Gaming System by sliding the Fold-Down Release Latch.
3. Plug your game system, DVD player or other unit’s power cord into the 120 volt
AC outlet on the left side of the Game Power Mobile Gaming System (see
below).
Note: If using the included Household Use AC/DC Adapter to power the Mobile
Gaming System at home, plug the video game or DVD player power cord
directly into a 120 volt AC household outlet.
4. Plug the video game or DVD’s “Video Out” plug into the Mobile Gaming
System’s (yellow) Video In jack.
3. Plug the video game or DVD’s “Left Audio” plug into the (white) AUDIO L jack.
4. Plug the video game or DVD’s “Right Audio” into the (red) AUDIO R jack.
5. If desired, plug headphones (not included) into the headphone jack.
Note:
Headphones are not required.
6. Press the power switch on the screen and the green LED will light. The power
switch controls power to the screen only.
POWER
SWITCH
LEDS
VIDEO IN
LEFT
AUDIO
RIGHT
AUDIO
HEADPHONE
JACK
120 VOLT AC OUTLET
FOLD-DOWN
RELEASE LATCH
4
INSTRUCTIONS
Powering the Mobile Gaming System Using the DC Power Cord
Open the 12 volt DC Power Cord Storage Compartment on the bottom of the unit.
Connect the attached 12 volt DC Power Cord to the 12 volt DC Accessory Plug.
Plug the Accessory Plug into a vehicle’s accessory power outlet (or other 12 volt DC
power source that can supply at least 10 amperes).
Note: This may require the vehicle’s ignition switch to be turned on.
CAUTION
If amber LED lights, the vehicle’s voltage is too low. Stop use and
charge the vehicle’s battery before continuing.
Powering the Mobile Gaming System
Using the Household Use AC/DC Adapter
Plug the barrel connector of the Household Use AC/DC Adapter into the jack
labeled DC IN 12V on the right side of the Game Power Mobile Gaming System.
Connect the Household Use AC/DC Adapter’s plug into a 120 volt AC household
outlet.
Note: The AC/DC Adapter cannot power the built-in power inverter.
HOUEHOLD USE
AC/DC
ADAPTER
12 VOLT DC IN
ATTACHED 12 VOLT DC
POWER CORD
12 VOLT DC
ACCESSORY PLUG
DC POWER CORD TO
DC ACCESSORY PLUG CONNECTION
ATTACHED 12
VOLT DC POWER
CORD STORAGE
COMPARTMENT
VEC401_Manual_030705 3/9/05 2:45 PM Page 4