Sony PlayStation 3 Video Game Console User Manual


 
27
Playing games
US
Controller settings
You can change controller settings by selecting (Settings)
(Accessory Settings).
Reassign
Controllers
If a controller port or number is specified by the software,
you can use this setting to assign the appropriate controller
port or number.*
Controller
Vibration Function
You can set the vibration function to on or off. It is set to [On]
by default.
*
You cannot assign controller port 2-D using this system.
Hint
You can change settings for the controller during gameplay by pressing the
PS button. Select
(Accessory Settings) under (Settings) in the XMB
screen, or select [Controller Settings] from the screen that is displayed.
Saved data for PlayStation
®
3 format software
Saved data for PlayStation
®
3 format software is saved on the system’s
hard disk. The data is displayed under (Game) (Saved Data
Utility).
Saved data for PlayStation
®
format software
To save data from PlayStation
®
format software, you must create internal
memory cards on the hard disk and assign the cards to slots.
Notice
This system does not support playback of PlayStation
®
2 format software. Even
if you create an internal memory card for PlayStation
®
2 format software, you
will not be able to use it to play games.
Creating internal memory cards
1 Select (Game) (Memory Card Utility (PS/PS2)), and
then press the button.
2 Select (Create New Internal Memory Card), and then press
the button.
3
Select [Internal Memory Card (PS)], and then press the button.
Follow the on-screen instructions to complete the operation.
Assigning slots
1 Select (Game) (Memory Card Utility (PS/PS2)), and
then press the button.
2 Select the internal memory card that you want to use, and then
press the button.
Select [Assign Slots], and then assign [Slot 1] or [Slot 2].
Hints

Depending on the software, slots may be preassigned. For details, refer to the
instructions supplied with the software.

You can assign slots during gameplay. Press the PS button on the wireless
controller, and then select [Assign Slots] from the screen that is displayed.