Filter
Top Products
38
Using the System Configuration menu
When using the Component AV Cable (for PlayStation®2) (sold
separately), you must set the mode to match the input jacks on your TV.
Note
The "RGB" setting is only for PlayStation®2 and PlayStation® format software.
When you watch a DVD, the mode automatically switches to "Y Cb/Pb Cr/Pr".
You can set this option when using the DVD Remote Control (for
PlayStation
®2) (sold separately).
Note
The following limitations apply when the DVD Remote Control is set to "Gameplay
Function On":
– Depending on the software, some remote control buttons may not work properly.
– The buttons of the DVD Remote Control will not work when two or more
buttons are pressed at the same time.
– Some software titles may stop operating properly when a controller is removed
from controller port 1. If this happens, set to "Gameplay Function Off".
You can use this option to select the language displayed on the main menu,
Browser screen, System Configuration menu, and Version Information
screen.
Component Video Out
Y Cb/Pb Cr/Pr Select this option when connecting the console to
component video input connectors (default setting for
SCPH-70002).
RGB Select this option when connecting the console to
RGB input connectors (default setting for
SCPH-70003).
Remote Control
Gameplay Function On Select this option when operating PlayStation®2 or
PlayStation
® format software with the DVD Remote
Control.
Gameplay Function Off Select this option when not operating PlayStation
®2
or PlayStation
® format software with the DVD
Remote Control.
Language
English Displays messages in English
French Displays messages in French
Spanish Displays messages in Spanish
German Displays messages in German
Italian Displays messages in Italian
Dutch Displays messages in Dutch
Portuguese Displays messages in Portuguese