Filter
Top Products
Getting Started
9
You can register your PSP® system with the Base
Station and set to connect to a wireless LAN.
When you connect your PSP
® system to the Base
Station via your router, set up according to the
following procedures.
1
Connect a PC to the Base Station and
follow the Setup Wizard to complete
the Wireless Mode Setup for CLIENT.
2
Turn on the WLAN switch of the PSP®
system.
3
Connect your PSP® system to the
router. (For details, refer to the
Operating Instructions of the PSP
®
system.)
4
Updating your PSP® system software
via the Internet.
5
Select under from the home
menu, and then press the button.
The setting screen for use of LocationFree®
Player is displayed. Press the right button to
go to the next screen.
z Tip
To re-register your PSP® system with the Base
Station or to register your PSP
® system with
another Base Station, you must perform [Basic
Settings] again (1 page 21).
6
Select [Start], and then press the
button.
Creating Basic Settings for
the LocationFree® Player
(Registering at Home)