Filter
Top Products
Watching TV or Video on the LocationFree® Player
16
1
Select from the control panel, and
then press the button.
The on-screen remote control is displayed.
Clearing the remote control
Press the button or the button.
You can operate a video deck or DVD player that
is connected to the Base Station using the on-
screen remote control.
For example, if you have a Sony-manufactured
DVD player connected to the Base Station, you
can display an on-screen remote control with
similar features as the remote control supplied
with the Sony-manufactured DVD player, and
use the on-screen remote control to operate the
DVD player.
To display the remote control for a connected
device on the PSP
® system, you must first save
the data for the remote control on a Memory Stick
Duo™ and then complete [Remote Control
Settings] (1 page 20).
For more information on remote control data, see
www.sony.com/locationfree/ownerslounge/psp.
Depending on the connected device, the usage
method of the remote control for the device may
vary. The main functions that are commonly
available on remote controls are explained below.
1 Switch the function to be controlled by
the remote control for multifunction
devices such as hard disk/DVD
combined video recorders.
2 Turn the connected device on/off.
3 Switch among control panels for
connected devices with remote controls
that have multiple control panels.
4 Operate the connected device.
z Tip
To make faster response to the remote control, video
and audio may appear to speed up when operating the
remote control. It is not a malfunction.
Notes
• Save remote control data in the following location
on your Memory Stick Duo™:
• Use the same method of operation as you would with
the remote control supplied with the connected
device. However, buttons for features that are not
available in the connected device cannot be used even
if they are shown on the on-screen remote control.
• Button names as shown on the on-screen remote
control may be different from the names shown on the
remote control supplied with the connected device.
• When using a multifunctional connected device such
as a combined Hard Disk or DVD player/video deck,
Using the Remote Control
Using the remote control to
control the video device(s)
connected to the Base Station
Remote control