Filter
Top Products
1-28 (E)
HDCU-950 IMM
Blank panel
B3 x 5
Handle
VDA-61 board
Upper groove
Lower groove
B3 x 5
There is a difference of the depth.
Rear side (VDA-61 board)
1. Remove the two screws and remove the blank panel by
holding the handle.
n
Store the removed blank panel in a safe place.
2. Insert the VDA-61 board in the slot.
m
. Because there is a difference of the depth between
the upper groove and the lower groove, insert the
VDA-61 board in a straight line after inserting it in
the lower groove.
. Check that the VDA-61 board is securely connected
to the motherboard (MB-951 board).
3. Secure the VDA-61 board with the two screws
removed in step 1.
1-8. Installing the HKCU-951/953