Filter
Top Products
U
SING
W
INDOWS
P
OST
S
CRIPT
D
RIVER
A.2
Installing PS Drivers
PPDs, in combination with the PostScript driver, access the
printer features and allow the computer to communicate with
the printer. An installation programme for the PPDs is provided
on the supplied software CD-ROM.
N
OTE
:
For PostScript printing, an optional PS DIMM should be
installed into the printer. For more information, see
Appendix D,“Installing Printer Options.”
Avaliable PS DIMMs:
- 4 MB : PS 3 Emulation, PS 136 fonts
Before installing, make sure that the printer and the PC are
properly connected with parallel, USB, or network interface. For
information about:
• connecting with the parallel interface, see page 2.11.
• connecting with the USB interface, see page 2.12. For
Windows 98/Me, the USB driver must be installed.
• connecting with a network interface. For a ML-2250, you need
to install an optional network interface card; see “Installing a
Network Card” on page D.7.
Installing PS Drivers
1
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and an maintenance
window appears.
If the maintenance window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing “X” with the
letter of your drive and click OK.