Filter
Top Products
EN
9
Advanced Operation
FLAT
P
TRACK
POPBASS ROCK
JAZZ
DSP
Programming Tracks
(continued)
5. Repeat steps 2-4 for further selections. Maximum 10
selections can be made.
6. Press STOP to exit programming mode or unit
returns to stop mode automatically after 30 seconds if
no keys are activated.
See section on “Play Modes” to playback programmed
tracks.
Editing program
Over writing Programmed Tracks
1. In stop mode, press and hold MODE to enter
programming mode.
2. Press MODE to select the programmed track you
want to overwrite.
3. Press or to select the new track you want
to store.
4. Press MODE to confirm selection.
5. Repeat steps 2 and 3 to overwrite additional
programmed tracks.
Deleting Programmed Tracks
1. In stop mode, press and hold MODE to enter
programming mode.
2. Press MODE to select the programmed track to be
deleted.
3. Press and hold DSP for about 3 seconds to delete
unwanted track from your program list. ‘ - - ‘ shows to
indicate track deleted from the program.
continued...
MODE
FLAT
P
TRACK
POPBASS ROCK
JAZZ
Advanced Operation
OFF LOCK
FLAT
k
TRACK
POPBASS ROCK
JAZZ
POPBASS
FLAT
ROCK
JAZZ
TRACK
10
MODE
Deleting Programmed Tracks (continued)
4. Repeat steps 2 and 3 to delete additional tracks
from the program.
5. To cancel editing program, press STOP once to
return to stop mode OR the unit will automatically
exit the editing mode after 30 seconds if no keys are
activated.
Key Lock
To avoid accidental key activation, slide the HOLD key
to LOCK position to lock keys. Lock icon can be
seen on display. Slide to OFF position to unlock keys.
File Download
When the unit is connected to the computer,
will be displayed on the screen.
During transfer, the icon will flash. When the transfer
is complete, the icon will remain lit. The total number
of tracks and total playing time will be displayed.
NOTE:
See Software Instruction Manual for instructions to
install USB driver , music management software and
to transfer tracks to player and/or memory card.
RD1060 IB-EN 1/4/02 6:18 PM Page 16