Filter
Top Products
E-27
ENGLISH
Press the POWER switch for more than 5 seconds with the jog dial pressed. The power will be
turned off once the POWER switch is released. When the power is turned on again, all the settings
will return to the factory default settings.
The password setting returns to . Refer to Registering, Changing or Canceling the Password on
pg. 28.
SELECT
OK
EXIT
VIDEO SETTINGS
AUDIO SETTINGS
SAVE•LOAD
MENU
EXIT
SAVE 1
SAVE 2
LOAD 1
LOAD 2
SAVE•LOAD
SELECT
OK
EXIT
SAVE 1
SAVE 2
LOAD 1
LOAD 2
SAVE•LOAD
SELECT
OK
Registering
SAVING, LOADING AND CANCELING
AUDIO/VIDEO SETTINGS
You can register 2 sets of audio, video and display mode settings.
1
Select SAVE•LOAD in the MENU screen.
After adjusting the audio/video settings and
selecting the display mode, rotate the jog dial
to select SAVE•LOAD and press it to select
OK.
* The display mode can be registered as well.
On-Screen Display
2
Select SAVE.
1. Rotate the jog dial to select either SAVE 1
or SAVE 2 and press it to select OK.
2. The settings are registered.
* Select EXIT to return to the MENU screen.
* The new settings are saved over the
previous ones.
Loading
1
Select SAVE•LOAD in the MENU screen.
2
Select LOAD.
Rotate the jog dial to select either LOAD 1 or
LOAD 2 and press it to select OK.
* The settings will change to those loaded.
* Select LOAD 1 when loading the settings for
SAVE 1, and select LOAD 2 when loading
the settings for SAVE 2.
Resetting (For canceling all the registered settings)