37
4
Auto return
Auto return
Cursor Content
Select:
Main menu:
Auto return No / Yes
Cool: After min
back to
Heat: After min
back to
Auto return Yes
Cool: min,
Heat: min,
Changes saved
Change the settings with the F3 or F4 button.
•
Auto return: No (disable)/Yes (enable)
•
Cool: Timer setting range is 30 to 120 minutes
in 10-minute increments.
Temperature setting range is 19 to 30ºC
(67 to 87ºF).
•
Heat: Timer setting range is 30 to 120 minutes
in 10-minute increments.
Temperature setting range is 17 to 28ºC
(63 to 83ºF).
Press the SELECT button to save the settings.
"Cool" includes "Dry" and "AUTO Cooling"
modes, and "Heat" includes "AUTO Heating"
mode.
The screen to set the selected item will appear.
The above settings will not be effective when the Temp. range is restricted and when the
system is centrally controlled (when the Temp. range setting is prohibited from local controller).
<Sample screens when the Auto return function is enabled>
Cool
AutoSet temp.
Mode Fan
Fri
Cool
AutoSet temp.
Mode Fan
Fri
Cool
AutoSet temp.
Mode Fan
Fri
Temp. Temp. Temp.
Example: Lower the Set temp. to 24ºC (75ºF). 60 minutes later, the Set temp. will be back to 28ºC (83ºF).
60
minutes
later
The Set temp. is changed
from 28ºC (83ºF) to 24ºC
(75ºF) by a user.
60 minutes later, the Set
temp. returns to 28ºC (83ºF)
automatically.
Navigating through the screens
• To go back to the Main menu ........... MENU button
• To return to the previous screen ...... RETURN button