Filter
Top Products
26
Auto-Off timer
Controller operation-Function settings
Timer
1
Timer
Setting display:
Cursor
On/Off timer Yes
On Off
Repeat No
Auto-Off No
Stop in
--- min
Bring up the Timer setting screen.
(Refer to page 24.)
Select "Auto-Off", and press the SELECT
button.
2
Auto-Off timer
Select:
Cursor Cursor
Auto-Off No Yes
Stop in min
The current settings will appear.
Move the cursor to the "Auto-Off" or "Stop in ---
min" with the F1 or F2 button.
3
Auto-Off timer
Select:
Cursor Time
Auto-Off No Yes
Stop in min
Change the setting with the F3 or F4 button.
• Auto-Off: No (disable)/Yes (enable)
•
Stop in --- min: Timer setting (The settable
range is 30 to 240 minutes in
10-minute increments.)
The Auto-Off timer will not work in the following cases:
when Auto-Off timer is disabled, during an error, during
check (in the service menu), during test run, during
remote controller diagnosis, when the clock is not set,
during Function setting, when the system is centrally
controlled (when On/Off operation from local controller is
prohibited).
Main
Button operation