Filter
Top Products
How to Contact Logical
SCS160 / SCS320 / SCS480 Page 88 www.thinklogical.com
SCS160R / SCS320R
B.1.3 View a Buffer
You use less, cat, etc.to view a port’s buffer. There are at least two methods:
/lsi/ports/buf_<portname>
or
/proc/port_buffers/<portnumber>
B.1.4 Control the Output of Debugging Messages
There is an option to control the output of debugging messages. This is a very
handy option to have for sysadmins who are integrating NIS port access.
This option allows one method of isolating a problem area during NIS configura-
tion. You may output to syslog, but be careful sending to anything else.
port_access is called by the driver, and stdin, stdout, stderr, are not open.
See the --quiet option. The driver uses the -q option.