Filter
Top Products
System Administration
SCS160 / SCS320 / SCS480 Page 62 www.thinklogical.com
SCS160R / SCS320R
7.9.3 NIS Port Access
The file lsi_port_access contains the port permissions for connect, monitor
and clear. It is referenced by a group; you may define any number of groups you need.
The following example will illustrate how the group file is constructed.
group name : console server name : connect perm : monitor perm : clear perm
where:
group name is the name of the user’s group
console server name is the SCS’s hostname
connect perm port that a group can connect with
monitor perm ports that a group can monitor
clear perm ports that a group are allowed to clear
For example:
pbxgrp : tvscs320 : 1,2-6,13 : 5-9 : 1,7
itgrp : tvscs160 : 8-16 : 7 : 1,3,5,7-11
The above example shows two groups (pbxgrp and itgrp) that are allowed to
access port on a secure console server.
The first group, pbxgrp, can access an SCS with the hostname of tvscs320. The
group can connect to ports 1,2,3,4,5,6 and 13. It can monitor ports 5,6,7,8 and 9. This
group is allowed to clear ports 1,2,3,4,5,6 and 7.
The second group, itgrp, can access the SCS with a hostname of tvscs160. This
group can connect to ports 8,9,10,11,12,13,14, 15 and 16. It can monitor port 7, and
can clear ports 1,3,5,7,8,9,10 and 11.
# LSI Port Access Permission file...
# Port Access Permission for the user defined group name(s) are defined below
# Permissions can be any or all of the forms:
# - decimal value
# - decimal range using a dash (-) as the range indicator
# - a comma (,) is used to separate digits and/or ranges
# - a colon (:) is used as the field separator.
#
# group name : console server name : connect perm : monitor perm : clear perm
user_group1 : scs160_milford : 1-16 : 1-3,5,8,16 : 0
user_group2 : scs320_boston : 1-6 : 12,15 : 3-7