InFocus INF5520 Video Game Sound System User Manual


  Open as PDF
of 16
 
Page 6
2) Align the rectangular brackets with the screw holes on the monitor. NOTE: If the monitor is mounted to feet, use Mounng
Bracket set #1. If the monitor is being mounted to a wall or to a stand and you want to mount the sound bar ush with the
monitor, use Mounng Brackets #2.
3) Using the screws from Step 1, aach the brackets, but do not ghten the screws completely.
4) Remove the exisng feet from the sound bar and set the feet aside.
5) Aach the sound bar to the mounng brackets with the provided screws.
6) Tighten all the screws securely.
7) Remove the adhesive strip from one side of the Velcro® tape and aach it to the power supply.
8) Without separang the Velcro or removing the other adhesive strip, determine where you want the power supply to aach to
the back of the monitor. NOTE: The power supply should be aached close to the monitor's AC Out jack.
9) Remove the remaining adhesive strip from the back of the Velcro and aach the power supply to the back of the monitor.
Shown with
Mounng Bracket
Set #2
 previous next