InFocus INF5520 Video Game Sound System User Manual


  Open as PDF
of 16
 
Page 11
LED Error Codes
1 2 3 4 5 6 7 8 9 10
When an error occurs, the volume strip (LEDs #1 - 7) turns solid except for the LED which indicates which error condion is occurring
(that LED will be ashing). LEDs #8-10 are not used for error condions.
LED 1 LED 2 LED 3 LED 4 LEDs 5-7 Error Type Troubleshoong Tip
Blinking Solid Solid Solid Solid An SPDIF compressed format
detected
Congure the DVD player (or audio source
device) audio output format seng to PCM
or PCM stream. Otherwise, use the Analog
RCA inputs from the audio source to the
sound bar without conguraon of the audio
source device.
Solid Blinking Solid Solid Solid The SPDIF rate is unsupported Congure the audio sample rate of the audio
source device to be either 44.1 KHz or prefer-
ably 48KHz.
Solid Solid Blinking Solid Solid An over-current error has
been detected
Reduce the volume seng of the sound bar
and subwoofer temporarily, and turn the unit
o for a short period and back on to reset
the circuitry. If this indicaon connues to
occur, then reduce the volume level for the
parcular source content being played.
Solid Solid Solid Blinking Solid Thermal Shutdown has oc-
curred.
Turn o the sound bar and verify the ven-
laon slots in the sound bar are clear, the
sound bar has proper venlaon and is not
being operated in an environment
that is too hot. If these condions exist,
reduce the volume level for the parcular
source content being
played.
For addional troubleshoong support, please contact:
InFocus Corporaon
Technical Support
6am-5pm PST
877-388-8385
www.infocus.com/support
 previous next