Filter
Top Products
6.3 MULTIPLEXER CONTROL
The HEGS5001 controller sends basic commands to the multiplexer to simulate pressing
the buttons on the front panel of the multiplexer. Refer to the Multiplexer User Manual
for details on the operation of the multiplexer.
ICON KEY DESCRIPTION
MUX Press once to send a single multiplexer command (LED
will flash). Press twice to lock the controller in multiplexer
mode. A steady LED indicates the controller is locked in
multiplexer mode. To exit the Multiplexer mode, press
the MUX ( ) key
+/- When in multiplexer mode, press + or – to scroll through
the available options on the controller LCD. Press Enter
when the desired option is displayed.
Select – Select a multiplexer (001-016)
Review – VCR Review mode
Zoom – Access/Exit the multiplexer zoom menu
Set – Mimics the Set key on the multiplexer
2
nd
– Mimics the 2
nd
key on the multiplexer
Menu – Access/Exit the multiplexer menu (not
available on all models)
Joystick Knob In the multiplexer setup menu, the joystick zoom in
function mimics the SET button.
Joystick (Left, Right
Up, Down)
The LEFT, RIGHT, UP, and DOWN directions of the
joystick mimic the multiplexer cursor keys.
The LEFT, RIGHT, UP, and DOWN directions of the
joystick mimic the mouse X/Y movements.
The joystick ZOOM IN function mimics the Set key or the
Left Mouse Button.
Full Screen Places the multiplexer into full screen mode.
Picture-in-Picture Places the multiplexer in picture-in-picture (PIP) mode.
Press again to reverse the cameras in the PIP.
2 x 2 Display Places the multiplexer into 2 x 2 mode. Continue
pressing to view different 2x2 screens.
3 x 3 Display Places the multiplexer into 3 x 3 mode.
4 x 4 Display Places the multiplexer into 4 x 4 mode.
Sequence Places the multiplexer into sequence mode. Select
sequence 1 or 2 from the soft menus.
Freeze Places the multiplexer into freeze mode.
Live Record Used to record a select camera
Rev. 1.01 46 900.0800
19-Jun-06