Filter
Top Products
SECTION 5:
STANDALONE MODE
HEGS5000
5.1 OPERATION
When the HEGS5000 Controller is in Standalone Mode, a user can control and program
KD6/HD6 PTZ cameras. The KD6/HD6 PTZ cameras must be defined in the HEGS5000
as defined in Section 2.3.1 and 4.3.
There are two overlays, English text version and Icon version, for the standalone mode.
System Controller HEGS5000
Iris
Close
Focus
Near
Freeze
Video
Iris
Open
Auto
Iris
System
Menu
Dome
Menu
PreShot
V
ectorScan
Run
Menu
Camera
Character
Select
Monitor
Menu
ESC
Enter
Figure 5. HEGS5000 English Text Overlay
System Controller HEGS5000
Sys
A
1. ____
2. ____
3. ____
Run
1. ___
3. ___
1. ___
3. ___
1. ___
3. ___
ABC
Figure 6. HEGS5000 Icon Overlay
All instructions are given using the text overlay with the Icon overlay in parenthesis.
Note: The Monitor Key (
) is not used in the standalone mode except as a Menu
Esc (
1. ____
2. ____
3. ____
)key. All cameras must have dedicated monitors.
Rev. 1.01 19 900.0800
19-Jun-06