Filter
Top Products
Universal Vehicle Power Supply Installation Instructions 9
9 Crimp a 3/8-inch terminal ring onto the braided ground
wire.
10 Connect the 4-pin connector to the power supply.
11 Connect the battery cable to the vehicle battery. For more
information, see the next section.
How to Connect to the Vehicle Battery
The procedure you use to connect to the vehicle battery
depends on the location of the battery terminal:
• Top
• Side
Connect to the Top Battery Terminal
1 Remove the nuts and bolts from the positive battery
terminal.
2 Place a 3/8-inch washer onto each end of the battery
clamp bolt.
Warning: Verify that the cable to battery connections are
correct. Electrical energy from vehicle batteries can
harm equipment and people.
Negative wire
(green and white)
Nut
Washers
Positive
wire (red)
Ground
wire (black)