Filter
Top Products
8 Universal Vehicle Power Supply Installation Instructions
4 Install heat shrink tubing on the battery cable jacket.
5 Insert and secure the fuse in the fuse holder assembly.
6 Assemble the negative wire:
a Strip 0.60 cm (0.25 in) of insulation from the green
and white wires.
b Twist the wires together.
c Crimp a 3/8-inch terminal ring onto the wires.
7 Assemble the positive wire:
a Cut a strip of red wire that is 5.08 cm (2 in) long.
b Strip 0.60 cm (0.25 in) of insulation from the red and
black wires.
c Twist the wires together.
d Crimp the fuse block assembly to the wires.
e Crimp the red wire you cut to the other end of the fuse
block assembly.
8 Install heat shrink tubing on the braided ground wire.
Battery cable
jacket
Ground wire
Heat shrink
tubing
Heat shrink
tubing
Green wire
White wire
Terminal ring
Fuse
Red wire
Black wire