Filter
Top Products
9
Value:
• If Inc/Dec1 is the selected Type, this determines the value sent by an Increment (CC#96) or Decrement
(CC#97) message. The available range is 000 – 127.
• If Mackie is the selected Type, this determines what the S-switches will control using that protocol. The
available settings are Record-Ready 1-8, Solo 1-8, Mute 1-8, Select 1-8, VPot Select 1-8, VPot Assign:
Track, VPot Assign: Send, VPot Assign: Pan, VPot Assign: Plugin, VPot Assign: EQ, VPot Assign:
Instrument, Fader Bank L or R, Fader Channel L or R, Flip, Global View, Display: Name, Display:
SMPTE, Function Select F1-F8, Global View: MIDI, Global View: Inputs, Global View: Audio Tracks,
Global View: Audio Instrument, Global View: Aux, Global View: Buses, Global View: Outputs, Global
View: User, Shift, Option, Control, Command, Read, Write, Trim, Touch, Latch, Group, Save, Undo,
Cancel, Enter, Marker, Nudge, Cycle, Drop, Replace, Click, Solo, Rewind, Fast Forward, Stop, Play,
Record, Up, Down, Left, Right, Zoom, Scrub, User A, User B, Touch 1-8, Touch M, SMPTE, Beats,
Rude Solo, M 116, M 117, and Relay.
• If HUI is the selected Type, this determines what the S-switches will control using that protocol. The
available settings are Touch 1-8, Select 1-8, Mute 1-8, Solo 1-8, Auto 1-8, Record-Ready 1-8, Insert 1-
8, Record 1-8, HUI 065-112, Rewind, Fast Forward, Stop, Play, Record, and HUI 118-128.
Pitch Wheel
MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings are
Common, USB A1-A16, and USB B1-B16.
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will
be sent to MAX25's USB connection regardless of this setting.
CV Pitchbend: Determines the range of the PITCH BEND WHEEL sent out of the CV OUT (if the CV OUT is
set to Pbend). The available range is 00 – 99.
Modulation Wheel
MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings are
Common, USB A1-A16, and USB B1-B16.
MIDI CC: If MIDI CC is the selected Type, this determines the MIDI CC. The available range is 000 – 127.
Max / Min: These determine the lowest (Min) and highest (Max) values. (If Min is higher than the Max, the
wheel's polarity will be reversed.)
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will
be sent to MAX25's USB connection regardless of this setting.
Footswitch
Type: The type of event that will be sent. The available settings are CC#000-127, Tap Tempo, Play, Rec
(Record), Stop, Play/Stop, Arp/Seq (Arpeggiator/Sequencer), and Sustain.
MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings are
Common, USB A1-A16, and USB B1-B16.
MIDI CC: If CC#000-127 is the selected Type, this determines the MIDI CC. The available range is 001 –
127.
Mode: This determines whether it is in Toggle or Momentary Mode.
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will
be sent to MAX25's USB connection regardless of this setting.
Expression Pedal
MIDI Channel: This setting determines over which MIDI channel data is sent. The available settings are
Common, USB A1-A16, and USB B1-B16.
MIDI CC: This determines the MIDI CC. The available range is 000 – 127.
Max / Min: These determine the lowest (Min) and highest (Max) values. (If Min is higher than the Max, the
pedal's polarity will be reversed.)
MIDI to DIN: Determines whether or not MIDI data is sent to the MIDI OUT (On) or not (Off). MIDI data will
be sent to MAX25's USB connection regardless of this setting.