A SERVICE OF

logo

Open as PDF
next previous
Configuration
Configuration
Z4Mplus and Z6Mplus User Guide 59
Change Password-Protected Parameters
Certain parameters are password protected by factory default.
1. Enter a four-digit password at the ENTER PASSWORD display.
MINUS (–) changes the selected digit position. PLUS (+) increases the selected
digit value. After entering the password, press SELECT. The parameter you wish
to change is displayed. If the password was entered correctly, you can now change
the value.
2. The default password is 1234. The password can be changed using the ^KP
(Define Password) ZPL II instruction.
Note • You have the option of making all parameters password protected. Refer to
PASSWORD LEVEL on page 81 for details.