A SERVICE OF

logo

Open as PDF
next previous
16 Z4Mplus and Z6Mplus User Guide
Printer Setup
Printhead Pressure Adjustment
Printhead Pressure Adjustment
Refer to the illustration below.
This adjustment may be necessary if printing is too light on one side or if thick media
is used.
The pressure adjustment dials for the Z4Mplus each have four possible settings
designated by blocks of increasing size embossed on the print mechanism. The
smallest block (fully counterclockwise) is considered position 1 and the largest block
(fully clockwise) is considered position 4. The same is true for the Z6Mplus, except it
has 7 positions.
Pressure Adjustment Dials
R
L