Command Descriptions
2–196
TLS 216 Programmer Manual
MEASUREMENT:REFLEVEL:PERCENT:MID?
might return 80.0E+0 indicating the mid reference level value is set to 80%
of HIGH.
MEASUrement:REFLevel:PERCent:MID2
Sets or queries the Mid reference level (as a percentage of HIGH). Used to
calculate the mid reference level (for the second waveform specified) when
taking a delay measurement. This command is equivalent to setting the
Reference Levels in the Measure menu.
Measurement
MEASUrement:REFLevel:PERCent:MID2 <NR3>
MEASUrement:REFLevel:PERCent:MID2?
MID2
?
<Space> <NR3>
MEASUrement :
REFLevel
:
PERCent
:
<NR3> ranges from 0 to 100%, and is the mid reference level. The default is 50%.
MEASUREMENT:REFLEVEL:PERCENT:MID2 40
sets the mid2 reference level value (for the second waveform specified) to
40% of HIGH.
MEASUREMENT:REFLEVEL:PERCENT:MID2?
might return 80.0E+0, indicating the mid2 reference level value for the
second waveform specified is set to 80% of HIGH.
MEASUrement:SNAPShot (No Query Form)
Displays the measurement snapshot.
Measurement
MEASUrement:SNAPShot
Group
Syntax
Arguments
Examples
Group
Syntax
