SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco
Note the navigation options at the bottom of the screen. Press Enter t
change a value, ESC to exit the screen, and the arrow keys to mo
the cursor.
o
ve
SendAll
I is
provided to speed configuration and to ensure identical settings. The
figuration parameter to
every SVP Server on the LAN.
SendAll can only be used after the IP
address is established on EACH SVP Server via the serial connection.
te identical settings across the LAN, set just the IP
ndAll
If
SendAll is to be utilized in your system, all passwords must be
identical. DO NOT CHANGE THE PASSWORD AT THE INITIAL
CONFIGURATION IF THE SendAll OPTION IS DESIRED. Use the
default password and change it globally if desired after a LAN
n an IP system with multiple SVP Servers, the
SendAll option
S=SendAll option allows you to send that con
If you anticipa
address and custom hostname (if desired) for each SVP Server using
the initial serial connection. Then connect via the LAN and use
Se
to set identical configuration options for all SVP Servers.
connection is established for all SVP Servers.
If independent administration of each SVP Server is desired, the
passwords may be set at initial configuration.
PN: 1725-36031-001_G.doc
26
