SpectraLink 8000 SVP Server Overview
The Front Panel of the SVP Server
The SVP Server’s front panel contains ports to connect to power, the
LAN, and to an administrative computer via an RS-232 port. Status
LEDs supply information about the SVP Server’s functioning.
L
N
K
O
A
C
C
O
Status
E
R
R
O
3 4 5 1 2
PWR
NETWORK
RS-232
RS-232 Port: male DB-9 connector (DTE) used for RS-232 connection to
a terminal, terminal emulator, or modem for system administration.
Link LEDs:
LNKOK: Lit when there is a network connection.
ACT: Lit if there is system activity.
COL: Lit if there are network collisions.
NETWORK: Port to wired (Ethernet) LAN.
ERROR: Lit when the system has detected an error.
STATUS: Indicate system error messages and status.
1: Heartbeat, indicates gateway is running.
2: If active calls.
3, 4, 5: Currently unused.
PWR (power jack): Connects to the AC adapter supplying power to the
system.
Use only the Polycom-provided Class II AC Adapter with output
24VDC, 1A.
Note that the model designation may be found on the label which is
on the side of the SVP Server.
PN: 1725-36031-001_G.doc
1
