Installing PDC-2000
Direct
Use the following steps to install PDC-2000 Direct:
1 Insert the PDC-2000 Direct for Macintosh installation disk
into an internal or external drive.
2 If the disk contents are not already visible, open the disk.
3 Be sure to read any Read Me file included on the disk. The
Read Me file contains important late-breaking product
information that may affect installation or use.
4 Double-click the Installer icon to open the Installer program.
5 Click the Install button and follow instructions on the screen.
6 When an on-screen message indicates that installation has
been completed, click OK.
7 Restart your computer.
Verifying camera internal settings from your Macintosh
The PDC-2000 camera stores the following settings in its
internal memory:
• User name
• Default picture label
• Current date
• Current time
• Automatic shutoff timeout values
• Camera sound indicator status
Before using the PDC-2000 camera for the first time, verify
(and change, if necessary) these settings by following
instructions in Changing operating preferences on page 75.
22
