A SERVICE OF

logo

Open as PDF
next previous
6 Place the preferred medallion on top of the handle.

Always clean the tap unit with hot water and, if necessary, with some
washing-up liquid before you place it on the keg and insert the tube.
1 Remove the protection cap and the tube from the keg.
2 Put the tap unit onto the connection top of the keg by pushing it
down rmly (‘click’).
If you snap the tap unit onto the keg correctly, it ts nicely between the
two chimes of the keg.
Tip: If you can move the arm of the connection top freely up and down, the tap
unit is placed properly on the keg.

1 Insert the exible tube into the tap body.
 9
4222.001.9361.3.indd 9 08-02-10 10:52