28
Install memory, firmware, or option cards
Installing an option card Your printer has one expansion card slot
that supports a number of option cards.
The following table describes their
function.
Note: The network models ship with an Ethernet print
server already installed.
You need a small Phillips screwdriver to
install these options.
1 Remove the system board access
cover (see Page 22).
2 Remove the screw from the metal
plate that covers the connector
slot, and then lift the plate off.
Save the screw.
Warning: Option cards are easily damaged by static
electricity. Touch something metal on the printer before
you touch an option card.
3 Unpack the option card.
Save the packing materials.
Card Function
MarkNet internal print server Adds an Ethernet or Token-Ring port so you can connect your printer to a
network.
Install a MarkNet™ N2501e or N2401e internal print server if you received
either of these cards as part of a multifunction printer upgrade.
Parallel 1284-B Interface Card Adds a parallel port.
Coax/Twinax Adapter for SCS Adds a coaxial/twinaxial port.
Serial Interface Card Adds a serial port.
