A SERVICE OF

logo

Diagnostic Information 2-131
5016-001
K The duplex option printed page is skewed.
FRU Action
1Holder/Arm/
Roller
Assembly, Rear
Door
If skewing is a problem, be sure the skew holder
assembly is correctly installed in the rear cover.
The holder should be inclined about 3 degrees. Go
to Skew Correction on page 1-41.
2 Skew Adjusting
Rollers
Check the skew adjusting rollers in the lower unit
for signs of loose, worn or damaged parts. Repair
or replace as necessary.