How do I use MarkVision Messenger?
102
• Select All Devices on the MarkVision Server to monitor all devices, even ones added to the
server later.
• Select Devices in a Specified Folder to monitor all devices in a specified folder, even ones
added to the folder later.
• Select Selected Devices to specify which devices to monitor.
If you choose Selected Devices, you can:
• Click the name of a specific device in the Selected Devices list to select it.
• Click Select All to select all devices currently in the Selected Devices list.
• Click Deselect All to remove all devices selections from the Selected Devices list.
Click when you're ready to continue.
Notes:
• If your Action is triggered by a Folder Event, you may be confused to be asked to choose a
folder for a second time. By choosing a folder on this screen, you can narrow the list of
printers you are interested in. In MarkVision Professional, printers can occupy more than one
folder at a time.
• For example, if your Action is triggered when printers move into a folder named "Toner Level
< 10%," and you only want to monitor printers in the folder named "Building 7." select the
"Building 7" on this screen. MarkVision Messenger will execute your Action when a printer
from the "Building 7" folder enters the "Toner Level < 10%" folder.
Step 7: Select a command
You must tell MarkVision Messenger which type of command your Action will execute.
From the Command Type screen, you can:
• Choose to execute a command line on the MarkVision Server.
Note: Because command lines are run on the MarkVision Server, you must be logged in
as the MarkVision administrator to select this option.
• Choose to send an e-mail message.
• Choose to execute a command line on a remote host.
Note: This option requires that a rexec server be present on the remote host.
• Choose to setup a Tivoli event adapter.
Note: this option is only available if the Device Status Alert option is selected.
Click when you're ready to continue.
