31
COMBI
1.1
2.12.23.13.23.33.44.14.24.34.46.17.17.2
2. Combination mode
For details on how to select pages in Combination mode,
refer to p.1.
In this display page you can select and play Combinations.
A Combi allows you to use up to 8 programs at one time
from the keyboard.
1.1–1: Combi (Combination)
1.1–1a: Bank, Combi Select, Category, Cat.Hold,
10’s Hold, (Tempo)
Bank (Bank Select) [Bank A…C]
This is the Combination bank display.
Use the front panel BANK [A]–[C] keys to select the bank.
On this instrument, there are a total of 384 combination pro-
grams in three rewritable banks (A, B, C), each containing
128 combinations. (
☞For a list of the factory-set combina-
tions, refer to the separate VNL.)
If you have selected the “Program Select” (1.1–2c) edit
cell for one of the timbres 1–8 in the Prog page, Bank
[A]–[GM] will switch the program banks for timbres 1–
8.
Combi Select (Combination Select) [0...127: name]
Here you can select a combination. Select this parameter,
and use the [INC], [DEC] keys, numeric keys [0]–[9], or the
[VALUE] dial to select a combination. You can also select
combinations by category, or using “10’s Hold.” (
☞p.2
“Cat.HOLD,” ”Select by Category,” “10’s HOLD”)
You can select Combis by receiving MIDI program
changes via a connected external MIDI device, or by
using a foot switch. (
☞p.125 “Foot SW Assign” (GLO-
BAL 1.1–3a), p.222 “Foot Switch Assign List”)
COMBI PAGE MENU
Play 1.1: Play Select and play combinations. Select a
program for each timbre, and set sta-
tus, pan, and level. Select an arpeggio
pattern and make settings. (
☞p.31)
P/M 2.1: Ed-Prog/Mix Select a program for each timbre, and
set pan and level. (Same as the 1.1:
Play parameters; can be edited from
either page.) (
☞p.35)
Ctrl 2.2: Ed-Ctrl Controller settings. (☞p.36)
Prm1 3.1: Ed-Param1 MIDI, OSC, and Pitch settings for each
timbre. (
☞p.36)
Prm2 3.2: Ed-Param2 Delay and scale settings for each tim-
bre. (
☞p.38)
KeyZ 3.3: Ed-Key Zone Key zone settings for each timbre.
(
☞p.39)
VelZ 3.4: Ed-Vel Zone Velocity zone settings for each timbre.
(
☞p.40)
MIDI1 4.1: Ed-MIDI Filter1 MIDI message transmission/reception
filter settings for each timbre, such as
Prog Change and After Touch. (
☞p.41)
MIDI2 4.2: Ed-MIDI Filter 2 Filter settings such as JS and Ribbon
Ctrl. (
☞p.41)
MIDI3 4.3: Ed-MIDI Filter 3 Filter settings; REALTIME CONTROL
Knob (
☞p.42)
MIDI4 4.4: Ed-MIDI Filter 4 Filter settings; SW, Other Ctrl Change
(
☞p.42)
Arp 6.1: Ed-Arp. Arpeggiator settings. (Same as the 1.1:
Play parameters; can be edited from
either page.) (
☞p.43)
IFX 7.1: Ed-InsertFX Bus and master effect send level set-
tings for each timbre.
Insert effect routing, selection, and set-
tings. (
☞p.45)
MFX 7.2: Ed-MasterFX Master effect selection and settings.
Master EQ settings. (
☞p.47)
COMBI 1.1: Play
Bank A
Preloaded combinationsBank B
Bank C
1.1–1a
1.1–1b
1.1–1c
