A SERVICE OF

logo

3-26 FUEL SYSTEM
Air Clean er
Remove:
Screw [A]
Carburetor Breather Tank [B]
Air Cleaner Housing [C]
Air Cleaner Housing Installation
Fit the projection [A] of the housing in the groove [ B] of
the joint duct [C] (front and rear), and tighten the clamp
screws.
Install:
Dust Seal [A]
Air Cleaner Housing Cover [B]
[C] Inside
Install the air cleaner housing and joint duct on the carbu-
retor.
Install:
Breather Hose and Clamp
Carburetor Breather Tank
Fit the joint duct on the fitting of the carburetor securely
and tighten the clamp screws.
Tighten the air cleaner housing bolts.
Install the spark arrester [A] so that the swelling faces
upward.