A SERVICE OF

logo

English-40
MAINTENANCE
4. Remove the wing nut in the air lter and remove
the paper lter.
5. Tap the paper lter against a xed surface to
remove dust.
If the paper lter is still dirty, it must be replaced.
6. Ret the air lter as follows:
Fit the paper lter in the air lter housing and
tighten the wing nut.
7. Insert the prelter on the rectangular part of the
paper lter.
8. Replace the cover over the air lter housing. Move
the cover up from below and ensure that the
prelter does not fall out of position. Secure with
both snap catches
Replacing the air lter, PF 21
1. Open the engine cover.
2. Remove the two plastic fasteners on the top of the
air lter cover and remove the air lter cover.
8009-150
8009-151
IMPORTANT INFORMATION
Do not use compressed air to clean the paper
lter.
Do not wash the paper lter.
Do not oil the paper lter.
8009-179