A SERVICE OF

logo

26
P/N 21145507 02/04
5
23.
PLAYING SURFACE
40
22.
4
After concrete has cured, remove tape, install pole cap (40),
fit pole assembly into sleeve (4).
IMPORTANT! Position pole assembly so the elevator
assembly is perpendicular with playing surface.
IMPORTANT! The elevator holes MUST be parallel with
playing surface.
IMPORTANT!:
WAIT A MINIMUM OF 24 HOURS BEFORE GOING ON TO NEXT STEPS. CONCRETE MUST CURE.
Use wedge to tap cap of ground sleeve until tight.
TWO PERSON MINIMUM REQUIRED
FOR THIS PROCEDURE. NOT
FOLLOWING RECOMMENDATION
MAY RESULT IN SERIOUS BODILY
INJURY AND/OR PROPERTY
DAMAGE.
WARNING