A SERVICE OF

logo

Open as PDF
next previous
02/04 P/N 21145507
17
27
25
14
36
26
28
37
25
37
39
25
26
30
35
32
30
35
29
29
32
31
33
33
33
Use the following assembly instructions if you have a
48" molded plastic backboard (Fan)
2A.
2B.
Install spacers (25) onto backboard brackets (26) with bolts
(12, 27) and lock-nuts (14, 28) as shown. Bend bracket
(26) to line up with holes in backboard.
Assemble elevator tubes (30) as shown. Tighten completely.
CAUTION:
THIS BACKBOARD AND GOAL ARE NOT DESIGNED TO
SUPPORT A PLAYER HANGING FROM THE GOAL OR NET.
FAILURE TO OBSERVE THIS CAUTION MAY CAUSE
BODILY INJURY AND / OR PROPERTY DAMAGE.
It is necessary for all
parts to be instaslled
for this mechanism to
work safely and
properly.
IMPORTANT!:
31
26