A SERVICE OF

logo

7-4
Advanced Concepts
Spanning Tree Protocol (STP)
Advanced Concepts
6. If the remaining STP parameter settings are adequate for your network,
go to step 9.
7. Use [Tab] or the arrow keys to select the next parameter you want to
change, then type in the new value. (If you need information on STP
parameters, press [Enter] to select the Actions line, then press H
to get
help.)
8. Repeat step 7 for each additional parameter you want to change.
9. When you are finished editing parameters, press [Enter] to return to the
Actions line.
10. Press [S] to save the currently displayed STP parameter settings and return
to the Configuration menu.
11. When you are finished configuring the switch, return to the Main Menu.
SEDONA.BK : sed_7.fm5 Page 4 Thursday, February 27, 1997 10:11 AM