A SERVICE OF

logo

42 Chapter 1 Troubleshooting control panel messages EN
68 NVRAM FULL
CHECK SETTINGS
Indicates that a non-volatile storage device is full. Some settings might
have been reset to factory defaults.
1 Check printer settings to determine which values have been
changed.
2 Clear the message by pressing [Go].
79 SERVICE (XXXX)
PRINTER ERROR
Description:
A hardware error has occurred.
X=Description
01XX = IO ASIC register error
02XX = video ASIC register error
03XX = IDE ASIC register error
1 Reseat the formatter.
2 Reseat the firmware DIMM.
3 Run formatter diagnostics.
4 Replace the firmware DIMM.
5 Replace the formatter.
80 SERVICE (XXXX)
EIO ERROR
Description:
A critical EIO failure has occurred. X indicates the slot number of the
device. XXXX indicates the error type.
1 Turn the printer off and on to reset the printer.
2 Reseat the EIO card.
3 Replace the EIO card.
www.GovTechMedia.com